2006 INEX Thunder Roadster Build — Atomic Autosports

Atomic Autosports — Wickliffe, Ohio

2006 INEX Thunder Roadster
Corner Balance & Motorsports Alignment

At Atomic Autosports, this 2006 INEX Thunder Roadster came in for two of the most important setup services any purpose-built race car can receive: a professional corner balance and a four-wheel motorsports alignment. On a lightweight race platform like the Thunder Roadster, even small setup changes can have a major effect on stability, predictability, and lap-to-lap consistency.

2006 INEX Thunder Roadster at Atomic Autosports during corner balance and alignment setup

Build Detail

2006 INEX Thunder Roadster — Corner Balance & Alignment

2006

INEX Thunder Roadster Race Setup

Corner Balance & Alignment

Corner Balance 4-Wheel Alignment Longacre Scales Cross-Weight Setup Driver Weight Sim Ride Height Alignment Report Race Setup

This Thunder Roadster came in for two of the most important setup services a purpose-built race car can receive — a four-wheel motorsports alignment and a full corner balance on Longacre scales. With driver weight simulated and cross weight corrected through suspension adjustment, the chassis was measured, dialed in, and verified to behave consistently and predictably at the limit.

Four-Wheel Motorsports Alignment

  • Four-wheel motorsports alignment
  • Steering inspection
  • Suspension inspection
  • Tire inspection
  • Tire pressure adjustment
  • Initial alignment measurement recording
  • Alignment adjustments to desired specifications
  • Final alignment measurements and report
  • Confirmation test drive

Corner Balance Setup

  • Corner balance
  • Longacre scale setup
  • Initial weight and ride height measurements
  • Suspension adjustment for correct cross weight
  • Driver weight simulation during setup
  • Final torque verification of suspension hardware
01

Four-Wheel Alignment

A test drive and full steering, suspension, and tire inspection, then measurements recorded and suspension adjusted to the desired track specifications.

02

Corner Balance

Set up on Longacre scales with baseline weight and ride height recorded, then cross weight corrected through suspension adjustment.

03

Driver Weight Sim

Weight added to replicate driver weight, so the car is balanced exactly as it will be driven on track.

04

Verified & Reported

Hardware torqued to spec, an alignment report produced, and a final test drive to confirm the setup responds properly.


Build Photos

2006 INEX Thunder Roadster — In the Shop

2006 INEX Thunder Roadster in the shop at Atomic Autosports during corner balance and alignment setup

2006 INEX Thunder Roadster — Corner balance and motorsports alignment.
Four-wheel alignment · Longacre scale setup · Initial weight & ride height · Cross-weight correction · Driver weight simulation · Final torque verification · Alignment report · Confirmation test drive

Photos: Bill Snow


Context

Why This Thunder Roadster Setup Matters

The INEX Thunder Roadster is built to reward precise setup work. Because the platform is lightweight and highly responsive, corner balance and alignment are critical to getting the most out of the chassis. A proper corner balance helps the car behave consistently in left and right turns, under braking, and when putting power down. A correct motorsports alignment sharpens turn-in, improves stability, and helps the car feel more predictable at the limit.

When these two services are performed together, the result is a better-balanced and more confidence-inspiring race car that is ready for serious track use.

Corner Balance

A proper corner balance helps the car behave consistently in left and right turns, under braking, and when putting power down — set on Longacre scales with driver weight simulated and cross weight corrected.

Motorsports Alignment

A correct motorsports alignment sharpens turn-in, improves stability, and helps the car feel more predictable at the limit — measured, adjusted to track spec, and verified with a final test drive.


Race Car Setup Shop in Ohio

Built for This Work

Atomic Autosports specializes in corner balancing, motorsports alignment, race prep, and chassis setup for dedicated track cars and enthusiast vehicles alike.

Whether it is an INEX Thunder Roadster, a track-prepped Corvette, a GR86, a Miata, or another performance platform, our shop focuses on the details that matter most.

Atomic Autosports shop — performance work in progress

Looking for Corner Balance or Track Alignment?

INEX Thunder Roadster corner balance Thunder Roadster alignment shop race car corner balance race car alignment shop motorsports alignment near Cleveland track setup shop in Ohio performance chassis setup corner balance and alignment service


Get Started

Schedule Your Race Car Setup

If you need corner balancing and motorsports alignment for your race car, Atomic Autosports can help make sure the chassis is properly dialed in for competition. From foundational setup work to full track prep, we make sure the car is ready for the way it will be driven.

Contact Atomic Autosports

Contact Atomic Autosports to schedule corner balancing, motorsports alignment, race prep, and chassis setup.

Corner Balance Motorsports Alignment Race Prep Chassis Setup

(216) 329-4005

Platforms We Know

Vehicles We Service

We work on the cars that matter to drivers who care. If you’re setting it up for the track, we know the platform.

INEX

Thunder Roadster

Chevrolet

Corvette

Toyota

GR86

Mazda

Miata / MX-5

Subaru

BRZ

Porsche

911 / Cayman

Honda

S2000

BMW

M Series

Chevrolet

Camaro

Ford

Mustang

Ariel

Atom

Your Car?

Ask Us

Don’t see your platform? We work on most performance vehicles — contact us to discuss your build.


Ready to Dial Yours In?

Schedule corner balancing, motorsports alignment, and full chassis setup for your race car — or any of the platforms we know. We make sure the car is ready for the way it will be driven.

View All Services